VOILES DE MELGES 32

GRAND-VOILES

P = 44.05
E = 15.49
12600 DPI
© North SailsChoice of:
MC-2 3DL 800L Carbon (recommended)
Using all carbon threads and a more versatile, user-friendly shape, this latest edition has produced results in a variety of conditions. The overall shape of the 800L main still features a twisty profile, but with a fuller bottom section when compared to the 600M Mainsail.

Grand-voile MA-2 3DL 600L
Using all Aramid threads and a twisty profile with a flat bottom section, the 600M mainsail will perform well in many conditions.

Caractéristiques:

» 2 lattes forcées, 3 lattes de chute
» Choix du coloris du numéro de voile et des bandes de visu (bleu, vert, rouge et noir).
» Renforts de barres de flèche
» Sac tube
» Pennons sur la chute
» Fenêtres
» Goussets de lattes internes
» Certificat IRC

VOILES D'AVANT

 
Toutes les voiles d'avant de Melges 32 sont équipées des éléments suivants:
 
Caractéristiques:

» Choix de coloris de bandes de visu
» North Sails “Turtle” bags for immediate flaking and headsail changes 
» Custom luff tape for Melges 32 headfoil 
» Spectra Leech and Foot Cords 
» Leech telltales
» 1 top batten and 2 leech battens- all luff loaded to eliminate snagging spinnaker during maneuvers
» Telltale windows in luff of jib 
» Stainless clew and tack rings 
» Kevlar reinforced head, clew and tack patches for durability

© 2008

VOILES D'AVANT DE MELGES 32

I = 40.86
J = 10.7
8820 DPI

With a lower thread count when compared to the Medium or Heavy jibs, the Light jib can be carried in up to 10 knots for a combination of finesse and speed that is needed for light air racing.

Choice of:
105% LC-2 3DL 800L Light Carbon (recommended)
105% LB-2 3DL 860M Light Carbon/Aramid

© 2008

VOILES D'AVANT DE MELGES 32

I = 40.86
J = 10.7
16800 DPI

This sail features a sail area that is similar to the Light jib but has a higher thread count for increased durability and a flatter, more draft forward, shape for better performance in stronger wind. Designed for a breeze range of 7-22 knots, this sail is ultra fast in both flat water and big wave venues.

Choice of:
105% MC-2 3DL 800L Medium/Heavy Carbon (recommended)
105% MB-2 3DL 860M Med/Heavy Carbon/Aramid

© 2008

VOILES D'AVANT DE MELGES 32

I = 40.86
J = 10.7
19600 DPI

When the breeze is really howling, and you need to reduce sail area to keep the boat on its feet, our heavy jib is the answer. This sail features a smaller sail area than the Light or Medium jibs, yet it still provides the performance and handling you need in One-Design racing.

Choice of:
#4 HC-2 3DL 800L Carbon (recommended)
#4 HB-2 3DL 860M Carbon/Aramid

SPINNAKERS DE MELGES 32

» Choice of color and design – Preview colors/ designs using “Color Me Fast” 
» Application of custom graphics (graphics require additional cost) 
» Choice of colored numbers (blue, black, red or green) 
» Belly Patches for retrieval line 
» Reinforced head, clew and tack patches

© 2008

» Contender Dynalite

The A3 is our largest spinnaker in terms of sail area and is the ideal selection for when sailing in the dead down wind mode. Built to the maximum mid-girth, this sail is perfect for the 7-13 wind range in either flat or choppy conditions.

© North Sails

» Contender Dynalite

With a flatter profile and smaller sail area than the A3, this sail performs very well in lighter conditions or when the 32 wants to get up and plane. Designed and geared for a more apparent wind forward position, the A2 is simply the best performing spinnaker on the market. Ideal for wind ranges 4-8 and 13-25.

* Melges 32 Class Rule allow for 2 spinnakers to be carried on the boat while racing. North Sails recommends the A3 and A2 as the primary spinnakers to be used for One Design Racing.